Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When it is flashingThe
1Count how many 1 (standby) indicator flashes between each two second break.
For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc.
2Press 1 on the top edge of the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes).
When it is not flashing1Check the items in the tables below.
2If the problem still persists, have your TV serviced by qualified service personnel.
Picture
No picture (screen is dark) and no sound•Check the aerial/cable connection.
•Connect the TV to the mains, and press 1 on the top edge of the TV.
•If the 1 (standby) indicator lights up in red, press "/1.
No picture or no menu information from equipment connected to the scart connector
•Press 
/
to display the connected equipment list, then select the desired input.
•Check the connection between the optional equipment and the TV.
Double images or ghosting•Check the aerial/cable connection.
•Check the aerial location and direction.
Only snow and noise appear on the screen•Check if the aerial is broken or bent.
•Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside).
Distorted picture (dotted lines or stripes)•Keep the TV away from electrical noise sources such as cars, motorcycles,
•When installing optional equipment, leave some space between the optional equipment and the TV.
•Make sure that the aerial/cable is connected using the supplied coaxial cable.
•Keep the aerial/cable TV cable away from other connecting cables.
Picture or sound noise when viewing a TV channel•Adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 27).
Some tiny black points and/or bright points appear on the screen•The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction.
• Select “Reset” (page 21).
No colour or irregular colour when viewing a signal from the
3 sockets•Check the connection of the 
3 sockets and check if each sockets are firmly seated in their respective sockets.
Sound
No sound, but good picture•Press 2 +/– or % (Mute).
•Check if the “Speaker” is set to “TV Speaker” (page 23).
Channels
The desired channel cannot be selected•Switch between digital and analogue mode and select the desired digital/analogue channel.
Some channels are blank•Scrambled/Subscription only channel. Subscribe to the pay TV service.
•Channel is used only for data (no picture or sound).
•Contact the broadcaster for transmission details.
Digital channels are not displayed•Contact a local installer to find out if digital transmissions are provided in your area.
•Upgrade to a higher gain aerial.
General
The TV turns off automatically (the TV enters standby mode)•Check if the “Sleep Timer” or the “Off Time” are activated (page 25).
•If no signal is received and no operation is performed in the TV mode for 10 minutes, the TV automatically switches to standby mode.
The TV turns on automatically• Check if the “On Time” is activated (page 25).
Some input sources cannot be selected•Select “AV Preset” and cancel “Skip” of the input source (page 26).
The remote does not function• Replace the batteries.
A channel cannot be added to the Favourite list• Up to 999 channels can be stored in the Favourite list.
HDMI equipment does not appear on “HDMI Device List”•Check that your equipment is HDMI control compatible equipment.
Not all channels are tuned•Check support web site for cable provide information.
Information Additional