Sony KDL-40ZX1 (Continued) 5 GB, Guide up-Start, Attach the monitor to the, 4Connect the mains lead (supplied) to the AC IN socket

•Do not put stress on the LCD panel or the frame around the screen.

•Hold the Table-Top Stand firmly with both hands.

4Connect the mains lead (supplied) to the AC IN socket.

F mark

Top part

Guide up-Start

3Attach the monitor to the Table-Top Stand using the screws (supplied with SS- TBL700). Attach the two bottom screws first, then the top two screws.

~

•Insert the plug fully into the socket.

•When using with an HDMI equipment, also connect the HDMI cable to the HDMI IN socket (page 27).

Top screws

Bottom screws

~

•If an electric screwdriver is used, set the torque to tighten at approximately 1.5 N·m {15 kgf·cm}.

(Continued) 5 GB