Using the TV Features

Remote Control and TV Controls/Indicators

Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by matching

eand E on the batteries to the diagram inside the battery compartment of the remote control.

Push and slide to open.

Remote Control and TV Controls

1

2

3

4

Buttons located at the right side of the TV will operate the same as these buttons on the remote control.

POWER

CHANNEL

VOLUME

INPUT

HOME

~

•The 5 button, PLAY and CH + have a tactile dot. Use them as a reference when operating the TV.

Button Description

1DISPLAY Press once to display the information pertaining to the channel and/or program when available. The OSD (On Screen Display) will time out in a few seconds or press again to immediately turn off the display. You can also set the display to show minimal information. See Info Banner on page 44.

2LIGHT Press to illuminate the buttons on the remote control so that you can control them easily even if the room is dark.

3FUNCTION The FUNCTION button indicator lights up momentarily Buttons when pressed to show which external equipment the remote

control is operating. You must first press one of these FUNCTION buttons to operate the corresponding equipment. See page 26 for programming the remote control.

40-9 ENT Press 0-9to select a channel; the channel changes after two seconds. Press ENT to change channels immediately.

20