Light Sensor

Enables the automatic picture (screen) brightness control. Light Sensor measures the

 

room brightness which allows the TV to automatically adjust the backlight brightness

 

based on the picture settings and the ambient room light conditions.

~

•Be sure not to put anything around the sensor, as its function may be affected (see page 25).

•In low light the range of the backlight control is reduced when Light Sensor is set to

On.

PC Power

On

Automatically enters to standby mode when there is no signal input

Management

 

for more than 30 seconds. The STANDBY LED on the front panel

 

 

will illuminate when PC Power Management switches the TV to

 

 

standby mode.

 

 

 

 

Off

Turns off PC Power Management.

~

•To bring the TV out of standby mode and recover TV features, press TV POWER on the remote control.

•PC Power Management is not VESA-compliant.

Logo Illumination Select to illuminate the Sony logo on the front panel of the TV. Select On or Off.

Initial Setup

If you have missed the Initial Setup when you first connected the TV or if you want to scan all receivable channels, you can run the Initial Setup. Follow the instructions on the screen. Settings such as picture and sound adjustments will not be affected by this Initial Setup.

~

• Favorites list will be cleared each time you run the Initial Setup.

Menus the Using

45