Viewing pictures from the connected equipment

Turn on the connected equipment, then perform one of the following operation.

For equipment connected to the scart sockets using a fully-wired 21-pin scart lead (page 20)

Start playback on the connected equipment.

The picture from the connected equipment appears on the screen.

For an auto-tuned VCR (page 7)

In analogue mode, press PROG +/–, or the number buttons, to select the video channel.

For other connected equipment (page 20)

Press / to display the connected equipment list. Press F/f to select the desired input source, then press . (The highlighted item is selected if 2 seconds pass without any operation after pressing F/f.)

When the input source is set to “Skip” in the “AV Preset” menu under the “Set-up” menu (page 37), that input does not appear in the list.

Additional operations

To

Do this

 

 

Return to normal TV

Press DIGITAL/ANALOG.

mode

 

 

 

Access the Input signal

Press to access the Input

index table (except

signal index table. To select an

analogue mode)

input source, press F/f, then

 

press .

 

 

Change the volume of

Press 2 +/–.

the connected HDMI

 

control compatible

 

audio system

 

 

 

Mute the sound of the

Press %.

connected HDMI

Press again to restore.

control compatible

 

audio system

 

 

 

Using the Tools menu

Press TOOLS to display the following options when viewing pictures from connected equipment.

Options

Description

 

 

Close

Closes the Tools menu.

 

 

Picture Mode

See page 28.

 

 

Sound Mode

See page 30.

 

 

Motion Enhancer

See page 34.

 

 

Speaker

See page 36.

 

 

PAP (except PC input

See page 22.

mode)

 

 

 

PIP (in PC input

See page 23.

mode only)

 

 

 

Auto Adjustment (in

See page 33.

PC input mode only)

 

 

 

Horizontal Shift (in

See page 33.

PC input mode only)

 

 

 

i Volume

See page 36.

 

 

Sleep Timer (except

See page 37.

PC input mode)

 

 

 

Power Saving

See page 38.

 

 

Auto Clock Set

Allows you to switch to digital

 

mode and obtain the time.

 

 

To view two pictures simultaneously

– PAP (Picture and Picture)

You can view two pictures (external input and TV programme) on the screen simultaneously.

Connect the optional equipment (page 20), and make sure that images from the equipment appear on the screen (page 22).

~

•This function is not available for a PC input source.

•You cannot change the size of the pictures.

1 Press TOOLS to display the Tools menu. 2 Press F/f to select “PAP”, then press .

The picture from connected equipment is displayed on the left and the TV programme is displayed on the right.

3 Press number buttons or PROG +/– to select the TV channel.

To return to single picture mode

Press or RETURN.

z

The picture framed in green is audible. You can switch the audible picture by pressing G/g.

22 GB