Set-up menu
You can select the options listed below on the “Set- up” menu. To select options in “Settings”, refer to “Navigating through menus” (page 27).
Timer Settings | Sets the timer to turn on/off the TV. |
Sets a period of time after which the TV automatically switches itself into standby mode.
When “Sleep Timer” is activated, the 
(Timer) indicator on the TV front panel lights up in orange.
z
•If you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”.
•A notification message appears on the screen one minute before the TV switches to standby mode.
On TimerSets the timer to turn on the TV from standby mode.
“Day”: Selects the day on which you want to activate the “On Timer”.
“Time”: Sets the time to turn on the TV.
“Duration”: Selects the time period after which the TV automatically switches to standby mode again.
“Volume
Allows you to adjust the clock manually. When the TV is receiving digital channels, the clock cannot be adjusted manually since it is set to the time code of the broadcast signal.
AV Preset | Assigns a name to any equipment connected to the side and rear sockets. The name | |||
| will be displayed briefly on the screen when the equipment is selected. You can skip | |||
| input signals from connected equipment that you do not want displayed on the | |||
| screen. |
|
|
|
| 1 Press F/f to select the desired input source, then press . | |||
| 2 Press F/f to select the desired option below, then press . | |||
| Equipment labels: Uses one of the preset labels to assign a name to connected | |||
| equipment. |
|
|
|
| “Edit:”: Creates your own label. Follow steps 2 to 4 of “Programme Labels” | |||
|
|
|
| |
| “Skip”: Skips an unnecessary input source. |
|
|
|
|
|
|
|
|
Auto S Video | Selects the input signal from S video sockets | 7 when | / | 7 sockets are both |
| connected. |
|
|
|
|
|
|
|
|
Functions Menu Using
Continued