Manual Programme Preset

Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”/“LNA”, press PROG +/– to select the programme number with the channel. You cannot select a programme number that is set to “Skip” (page 41).

Programme/System/Channel

Presets programme channels manually.

1Press F/f to select “Programme”, then press .

2Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press RETURN.

3Press F/f to select “System”, then press .

4Press F/f to select one of the following TV broadcast systems, then press RETURN.

B/G: For western European countries/regions

I: For the United Kingdom

D/K: For eastern European countries/regions

L: For France

5

Press F/f to select “Channel”, then press .

6

Press F/f to select “S” (for cable channels) or “C” (for terrestrial

channels), then press g.

~

“S” is not available when “United Kingdom” is selected for “Country” (page 7).

7 Tune the channels as follows:

If you do not know the channel number (frequency)

Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f.

If you know the channel number (frequency)

Using

VCR channel number.

Press the number buttons to enter the channel number of the broadcast you want or your

 

8 Press to jump to “Confirm”, then press .

Menu

9 Press f to select “OK”, then press .

 

Repeat the procedure above to preset other channels manually.

Functions

This name will be displayed briefly on the screen when the channel is selected.

Label

 

Assigns a name of your choice, up to five letters or numbers, to the selected channel.

 

To input characters, follow steps 2 to 4 of “Programme Labels” (page 40).

 

AFT

 

Allows you to fine-tune the selected programme number manually if you feel that a

 

slight tuning adjustment will improve the picture quality.

 

You can adjust the fine tuning over a range of –15 to +15. When “On” is selected,

 

the fine tuning is performed automatically.

 

Audio Filter

 

Improves the sound for individual channels in the case of distortion in mono

 

broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or

 

intermittent sound muting when watching mono programmes.

 

If you do not experience any sound distortion, we recommend that you leave this

 

option set to the factory setting “Off”.

 

~

 

You cannot receive stereo or dual sound when “Low” or “High” is selected.

 

Skip

 

Skips unused analogue channels when you press PROG +/– to select channels. (You

 

can still select a skipped channel using the number buttons.)

 

Continued

41 GB