Sony Analogue Set-upmenu, 40 GB, Programme Sorting, Auto Tuning, 1 Digit Direct, Programme Labels, To delete all the characters, If you input a wrong character

Analogue Set-up menu

You can select the options listed below on the “Analogue Set-up” menu. To select options in “Settings”, refer to “Navigating through menus” (page 27).

1 Digit Direct	When “1 Digit Direct” is set to “On”, you can select an analogue channel using one
	preset number button (0 – 9) on the remote.
	~
	When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering
	two digits using the remote.
Auto Tuning	Tunes in all the available analogue channels.
	This option allows you to retune the TV after moving house, or to search for new
	channels that have been launched by broadcasters.
Programme Sorting	Changes the order in which the analogue channels are stored on the TV.
	1	Press F/f to select the channel you want to move to a new position, then
		press .
	2	Press F/f to select the new position for your channel, then press .
Programme Labels	Assigns a channel name of your choice up to five letters or numbers. The name will
	be displayed briefly on the screen when the channel is selected. (Names for channels
	are usually taken automatically from Analogue Text (if available).)
	1	Press F/f to select the channel you want to name, then press .
	2	Press F/f to select the desired letter or number (“_” for a blank space),
		then press g.
		If you input a wrong character
		Press G/g to select the wrong character. Then, press F/f to select the correct
		character.
		To delete all the characters
		Select “Reset”, then press .
	3	Repeat the procedure in step 2 until the name is completed.
	4	Select “OK”, then press .

40 GB