Sony KDL-70X4500 Analogue Set-up, (Continued) 43 GB, Off, DVD, AMP, Display, PC Power, Language, When the, channels, Panel Key, Management, Auto Tuning, Light Sensor

Light Sensor	On		Automatically optimises the picture settings according to the
			ambient light in the room.

	Off		Turns off the “Light Sensor”.
	~
		• Do not put anything over the sensor, doing so may affect its function. See page 15
		to check the position of the sensor.

Logo Illumination		Lights up and turns off the Sony logo on the front of the TV.

Panel Key		Constantly lights up the touch sensors on the front of the TV.
Illumination

PC Power		Switches the TV to standby mode when the TV receives no signal from the PC
Management		input source for 30 seconds.

Language		Sets the language displayed on the menu screens.

Product Information		Displays product information of the TV.

Remote Control Set-		You can register a new remote to the TV or delete registered remotes from the TV.
up		Up to five remotes can be registered.

•When the BD, DVD, AMP and TV function buttons on the remote flash several times at the same time, replace the batteries of the remote with new ones.

Factory Settings Resets all settings to factory settings except for the “Programme Block” setting, “Digital Favourites” setting, and programme preset data. After completing this process, the initial set-up screen is displayed. Completing auto tuning in initial setup will reset the settings that are not reset by “Factory Settings”. To retain the settings, skip the “Auto Tuning”.

•Do not turn off the TV or press any buttons during “Factory Settings” (takes about 30 seconds).

Analogue Set-up

Programme List	Select “Off” to hide the list of analogue channels from the XMB™
Display	(XrossMediaBar).

1 Digit Direct	When “1 Digit Direct” is set to “On”, you can select an analogue channel using one
	preset number button (0 – 9) on the remote.
	~
	• When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and
	above by entering two digits on the remote.

Auto Tuning	Tunes in all the available analogue channels.
	You can retune the TV after moving house, or to search for newly launched
	channels.

Sony KDL-70X4500 Analogue Set-up, (Continued) 43 GB, Off, DVD, AMP, Display, PC Power, Language, When the, channels, Panel Key, Management, Auto Tuning, Light Sensor

Light Sensor

Automatically optimises the picture settings according to the

ambient light in the room.

Turns off the “Light Sensor”.

to check the position of the sensor.

Logo Illumination

Lights up and turns off the Sony logo on the front of the TV.

Panel Key

Constantly lights up the touch sensors on the front of the TV.

Illumination

PC Power

Switches the TV to standby mode when the TV receives no signal from the PC

Management

input source for 30 seconds.

Language

Sets the language displayed on the menu screens.

Product Information

Displays product information of the TV.

Remote Control Set-

Up to five remotes can be registered.

Analogue Set-up

Programme List

Select “Off” to hide the list of analogue channels from the XMB™

Display

(XrossMediaBar).

1 Digit Direct

preset number button (0 – 9) on the remote.

above by entering two digits on the remote.

Auto Tuning

Tunes in all the available analogue channels.

You can retune the TV after moving house, or to search for newly launched

Programme Sorting Changes the order of analogue channels stored in the TV.

1Press F/f to select the channel you want to move to a new position, then press

2Press F/f to select the new position for the channel, then press .

(Continued) 43 GB