Condition | Explanation/Solution | |
| The remote does not function. • Replace the batteries. | |
|
| • The remote may not function when using a microwave oven or certain |
|
| types of wireless equipment nearby. |
|
| • Perform “Remote Control |
|
| |
|
|
|
| The BD, DVD, AMP and TV | • The batteries inside the remote run out of battery life. Replace the |
| function buttons on the remote | batteries with new ones (page 6, 43). |
| flash at the same time. |
|
|
|
|
| The TV function button on the | • The batteries inside the remote run out of battery life. Replace the |
| remote flashes three times. | batteries with new ones (page 6). |
|
|
|
| HDMI equipment does not | • Check that your equipment is compatible with control for HDMI. |
| appear on “HDMI Device |
|
| List”. |
|
You cannot select “Off” in “Control for HDMI”.
•If you have connected any audio system that is compatible with control for HDMI, you cannot select “Off” in this menu. If you want to change the audio output to the TV speaker, select “TV Speaker” in the “Speaker” menu (page 41).
Not all channels are tuned for | • Check the support website for cable provide information. |
cable. | |
|
|
The speaker grille has come | • To attach the speaker grille, first turn off the TV, then unplug the AC |
off. | power cord. Then follow the procedure below. |
| Orient the speaker grille so that the location of the marks on the speaker |
| grille and TV match, insert the protrusions on the speaker grille into the |
| holes on the TV, and support gently. Check that the speaker grille and |
| TV are in contact without any gaps, and then secure it by pressing down |
| on the speaker grille from the top and sliding it into place. |
| To prevent the TV set from being damaged, do not touch the speakers or |
| their surroundings. |
Do not touch the speakers.