Programme Labels Assigns a channel name of your choice, up to five letters or numbers. The name appears briefly on the screen when you select the channel.
1Press F/f to select the channel you want to name, then press .
2Press F/f to select the desired letter or number (“_” for a blank space), then press g.
If you enter a wrong characterPress G/g to select the wrong character. Then, press F/f to select the correct character.
3Repeat step 2 until you complete the name.
4Press to exit the labeling procedure.
Programme Block | Blocks an individual channel from being watched. | |
| 1 | Press F/f to select the channel you want to block, then press . |
| 2 | Press F/f to select “Block”, then press . |
|
| To watch the channel, select “Allow”. |
Intelligent Picture | On with Indicator Automatically reduces the picture noise. The signal level bar | |
|
| is displayed when the channel is changed or the display is |
|
| changed from an input screen to a TV programme. |
|
|
|
| On | Automatically reduces the picture noise. |
|
|
|
| Off | Turns off the “Intelligent Picture” feature. |
Manual Programme To preset a channel, press PROG +/– to select the programme number, before
Preset | selecting “Label”, “AFT”, “Audio Filter”, “Skip”, “LNA” or “Colour System”. | ||
| You cannot select a programme number that is set to “Skip” (page 45). | ||
|
|
| |
| Programme/ | Presets programme channels manually. | |
| TV System/ | 1 | Press F/f to select “Programme”, then press . |
| Frequency | 2 | Press F/f to select the programme number you want to |
|
|
manually tune (if tuning a VCR, select programme 0), then press .
3Press F/f to select “TV System”, then press .
4Press F/f to select the best received TV broadcast systems, then press .
5Press F/f to select “Frequency”, then press .
6Press G/g to search for the next available channel. The frequency band (“VHF Low”, “VHF High” or “UHF”) is changed accordingly.
Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name appears briefly on the screen when you select the channel.
To input characters, follow steps 2 to 4 in “Programme Labels” (page 44).
Allows you to
You can adjust the fine tuning over a range of