Audio Filter Improves the sound of individual channels when distortion occurs in mono broadcasts. Sometimes a
If you do not experience any sound distortion, we recommend that you leave this option to “Off” (factory setting).
|
| ~ |
|
| • You cannot receive stereo or dual sound when “Low” or |
|
| “High” is selected. |
|
|
|
| Skip | Skips unused analogue channels when you press PROG +/– |
|
| to select channels. To select channels you have programmed |
|
| to skip, use the corresponding number buttons. |
|
|
|
| LNA | Improves the picture quality of the channel (noisy picture) |
|
| when the broadcast signal is very weak. |
|
| If you cannot see any improvement in the picture quality even |
|
| if you set to “On”, set this option to “Off” (factory setting). |
|
|
|
| Colour System | Selects the colour system (“Auto”, “PAL”, “SECAM”) |
|
| according to the channel. |
|
|
|
| Signal Level | Displays the signal level for programme currently being |
|
| watched. |
|
|
|
Digital Set-up
Digital Auto Tuning Tunes in the available digital channels.
You can retune the TV after moving house, or to search for newly launched channels.
Programme Sorting Allows you to remove or change the order of digital channels stored in the TV.
1Press F/f to select the channel you want to remove or move to a new position.
You can also select a channel by pressing the number buttons to enter its
2Remove or change the order of the digital channels as follows:
To remove a digital channel
Press . After a confirmation message appears, press G to select “Yes”, then press .
To change the order of the digital channels
Press g, then press F/f to select the new position for the channel and press G.
3Press RETURN.
Digital Manual Tuning Tunes the digital channels manually.
1Press the number buttons to enter the channel number you want to tune, or press F/f.
2When the available channels are found, press F/f to select the channel you want to store, then press .
3Press F/f to select the channel number where you want to store the new channel, then press .
| Repeat the above procedure to tune other channels. |
Subtitle Setting | When set to “For Hard Of Hearing”, visual aids for the hearing impaired are |
| displayed with the subtitles (when such visual aids are available). |
|
|
Subtitle Language | Allows you to select the language of the subtitles. |
|
|
Audio Type | Switches to broadcast for the hearing impaired when you select “For Hard Of |
| Hearing”. |
|
|
Functions Menu Using