Sony KDL-S23A11E, KDL-S26A11E, KDL-S32A11E, KDL-S40A11E Viewing pictures from connected equipment, 19 GB, Navigating through menus, 2,3,4, Using the Menu, Menu the Using, Additional operations, OK, 1 or, 4/4:

Viewing pictures from connected equipment

Switch on the connected equipment, then perform one of the following operation.

For equipment connected to the scart sockets using a fully-wired 21-pin scart lead

Start playback on the connected equipment.The picture from the connected equipment appears on the screen.For an auto-tuned VCR (page 11)

Press PROG +/-, or the number buttons, to select the video channel. You can also press / repeatedly until the correct input symbol (see below) appears on the screen.

For other connected equipment

Press / repeatedly until the correct input symbol (see below) appears on the screen or press OK to access the Input signal index table. Press , to select an input source, press m/M, then press OK.

1/	1,	2/	2:
Audio/video or RGB input signal through the scart
socket	/	1 or 2.	appears only if an RGB

source has been connected.

3:

Component input signal through the Y, PB/CB, PR/CRsockets / 3, and audio input signal through theL/G/S/I, R/D/D/D sockets / 3. 4/4:

Video input signal through the video socket 4, and audio input signal through the audio socket L/G/S/I

(MONO), R/D/D/D sockets 4. appears only if

the equipment is connected to the S video socket4 instead of the video socket 4, and S video input

signal is input through the S video socket 4.

5:

RGB input signal through the PC connectors 5, and audio input signal through the socket.

6: (KDL-S40A11E, KDL-S32A11E, KDL- S26A11E only)

Digital audio/video signal is input through the HDMI IN 6 socket. Audio input signal is analogue only if the equipment has been connected using the DVI and audio out socket.

Additional operations

To Do this

Return to the normal Press DIGITAL or ANALOG. TV operation

Access the Input	Press OK. Press , to select an
signal index table	input source, press m/M, then press
	OK.

Using the Menu

Navigating through menus

Menu the Using

2,3,4

4

1

1 Press MENU to display the menu.

2 Press M/m to select a menu icon, press ,. 3 Press M/m/</, to select an option.

4 Press M/m/</, to change/set the setting, then press OK.To exit the menu, press MENU.To return to the last display, press <.

Continued

19 GB