Option

Description

 

 

Audio Filter

Improves the sound for individual channels in the case of distortion

 

in mono broadcasts. Sometimes a non-standard broadcast signal

 

can cause sound distortion or intermittent sound muting when

 

watching mono programmes.

 

1

Press M/m to select “Low” or “High”, then press OK.

 

 

If you do not experience any sound distortion, we recommend

 

 

that you leave this option set to the factory setting “Off”.

 

2

Press OK to select “Confirm”, then press OK.

Note

•You cannot receive stereo or dual sound when “Low” or “High” is selected.

•Not available when “System” is set to “L”.

Skip

Skips unused analogue channels when you press PROG +/- to

 

select channels. (You can still select a skipped channel using the

 

number buttons.)

 

 

 

 

1 Press M/m to select “Yes”, then press OK.

 

2 Press OK to select “Confirm”, then press OK.

 

To restore a skipped channel, select “No” in step 1.

 

 

 

Decoder

Records the scrambled channel selected when using a decoder

 

connected to the scart connector

/

 

2 either directly or via a

 

 

 

VCR.

 

 

 

 

Note

 

 

 

Depending on the country/region selected for “Country” (page 29), this option may not be available.

1Press M/m to select “On”, then press OK.2Press OK to select “Confirm”, then press OK.

To cancel this function afterwards, select “Off” in step 1.

ATT

Attenuates the RF signal. In case of a strong RF signal, some video

 

interference may be displayed.

 

1

Press m/M to select “On”, then press OK.

 

2

Press OK to select “Confirm”, then press OK.

Tip

This option cannot be used if “AV2 Output” is set to “D-TV” (page 26)

Menu the Using

Continued

33 GB