Features menu

Features

Power Saving

Standard

Light Sensor

On

AV2 Output

TV

TV Speakers

On

PC Adjustment

 

 

 

Select:

Set: OK Back:

End: MENU

You can select the options listed below on the Features menu. To select options, see “Navigating through menus” (page 19).

Power Saving

1

2

Press OK to select “Power Saving”.

Press m/M to select one of the following, then press OK.

•Standard: Default settings.

•Reduce: Reduces the power consumption of the TV.

•Picture Off: Switches off the picture. You can listen to the sound with the picture off.

Light Sensor

Automatically optimizes the picture settings according to the ambient light in the room.

1

2

Press OK to select “Light Sensor”.Press m/M to select “On” then press OK.

AV2 Output

Sets a signal to be output through the socket labelled / 2 on the rear of the TV. If

you connect a VCR to the / 2 socket, you can then record from the equipment connected to other sockets of the TV.

1

2

Press OK to select “AV2 Output”.

Press m/M to select one of the following, then press OK.

•D-TV: Outputs a digital broadcast.

•A-TV: Outputs an analogue broadcast.

•AV1: Outputs signals from equipment connected to the / 1 socket.

•AV4: Outputs signals from equipment connected to the 4/4 socket.

•Auto: Outputs whatever is being viewed on the screen.

26 GB