|
| Other Information |
|
| |
Problem | Possible Remedies | |
|
|
|
Dotted lines | ❏ | Adjust the antenna. |
or stripes | ❏ | Move the projection TV away from noise sources such as cars, neon |
|
| signs, or |
|
|
|
Projection TV is fixed to | ❏ | Use Auto Program in the Channel Setup menu to add receivable |
one channel |
| channels that are not presently in memory (see page 58). |
| ❏ | Check your Channel Fix settings (see page 58). |
|
|
|
Double images or ghosts | ❏ | Use a highly directional outdoor antenna or a cable (if the problem |
|
| is caused by reflections from nearby mountains or tall buildings). |
|
|
|
Cannot select menu item | ❏ | If the item you want to choose appears in gray, it is not available to |
|
| be selected. |
|
|
|
Cannot receive any | ❏ | Use Auto Program in the Channel Setup menu to add receivable |
channels when using |
| channels that are not presently in memory (see page 58). |
cable TV | ❏ | Check your cable settings. |
|
|
|
Cannot gain enough | ❏ | Increase the volume of the cable box using the cable box’s remote |
volume when using a |
| control. Then press TV (FUNCTION) and adjust the projection TV’s |
cable box |
| volume. |
|
|
|
Cannot receive channels | ❏ | Check antenna connections. |
| ❏ | Adjust antenna. If you cannot receive DTV channels, see “Digital |
|
| Signal Strength” on page 59. |
| ❏ | Use Auto Program in the Channel Setup menu to add receivable TV |
|
| channels that are not presently in memory (see page 58). |
|
| |
Unable to select a channel ❏ | Use Auto Program in the Channel Setup menu to add receivable TV | |
|
| channels that are not presently in memory (see page 58). |
|
|
|
Lost password | ❏ | In the password screen (see page 60), enter the following master |
|
| password: 4357. The master password clears your previous |
|
| password; it cannot be used to temporarily unblock channels. |
|
|
|
Cannot change channels | ❏ | Be sure you have not inadvertently switched your projection TV |
with the remote control |
| from channel 3 or 4 setting if you are using another device to |
|
| change channels. |
| ❏ | If you are using another device to control channels, be sure the |
|
| “function” button for that device has been pressed. For example, if |
|
| you are using your satellite receiver to control channels, be sure to |
|
| press the SAT/CABLE button. |
|
|
|
Cannot cycle through the | ❏ | Be sure the Video Input feature has not been set to Skip (see page 65). |
other video equipment |
|
|
connected to the |
|
|
projection TV |
|
|
|
|
|
75
