Sony KDS-50A2020, KDS-55A2020, KDS-60A2020 Setting Up the Channel List - Initial Setup

Getting Started

Setting Up the Channel List - Initial Setup

After you finish connecting the TV, you can run the Initial Setup to create a list of available analog and digital channels. The Initial Setup screen appears when you turn on the TV for the first time after hooking it up.

1 Press	TV POWER
	to turn on the TV.

The Initial Setup screen appears.

2 Press V/v to highlight the on-screen display language. Then press . The message “Start auto program now?” appears.

3Press V/v to highlight “Yes” then press .

Auto Program performed through Initial Setup will automatically create a list of receivable channels from both VHF/UHF antenna and cable TV channels if both sources are connected.

If you choose to set up the channels at a later time, select the Auto Program option in the Channel settings to scan available channels (see page 41).

✍If you select "No" during Initial Setup, the Initial Setup screen will reappear each time you turn on the TV until you complete Auto Program.

Started Getting

21