Other Information
ConditionExplanation/Resolution
Some digital cable channels are not being displayed
❏Certain cable companies have limitations on the broadcast of digital cable channels. Check with your cable company for more information.
❏The digital cable channel may be set to Hidden in the Channel setting (see page 41).
General
Condition | Explanation/Resolution |
How to reset the TV to factory | ❏ Turn on the TV. While holding down the V button on the remote control, press the |
settings | POWER button on the TV. Release the POWER button then release the V button. |
| The TV will turn itself off, then back on again with Initial Setup. |
| WARNING: This operation will clear all of your customized settings including |
| Parental Lock setting. |
How to restore Picture settings | ❏ Select Reset setting option while in the Picture setting (see page 34). |
to factory settings |
|
|
|
How to restore Sound settings | ❏ Select Reset setting option while in the Sound setting (see page 37). |
to factory settings |
|
Cannot cycle through the other | ❏ Be sure the Label Video Inputs option is not set to Skip (see page 45). |
video equipment connected to |
|
the TV |
|
|
|
Cannot operate the setting | ❏ If a setting option appears in gray, this indicates that the setting option is not |
| available. |
|
|
Lost password | ❏ On the password screen, enter the following master password: 4357. The master |
| password clears your previous password; it cannot be used to temporarily unblock |
| channels. |
|
|
TIMER LED on front panel is | ❏ When lit, indicates that the timer is set (see page 46). When the timer is set, this |
lit | LED will remain lit even when the TV is turned off. |
|
|
POWER LED blinks in red | ❏ If the LED blinks three times, the lamp door or the lamp might not be securely |
| attached (see page 51). The LED blinks two times if there is an abnormal rise in |
| temperature inside the TV when any ventilation openings are blocked. |
|
|
LAMP LED blinks in red | ❏ Replace the lamp (see page 51). |
|
|
The replacement lamp does not | ❏ The lamp door or the lamp might not be securely attached. Repeat the steps on |
light up | page 51 to ensure that they are both installed securely. |
|
|
Digital cable box does not work | ❏ If you are connecting a VCR and digital cable box using a splitter, as described on |
| page 17, you must use a special |
| with your digital cable box. Contact your cable provider for details. |
TV cabinet creaks | ❏ When the TV is in use, there is a natural rise in temperature, causing the cabinet to |
| expand or contract and may be accompanied by a slight creaking noise. This is not |
| a malfunction. |
|
|
A slight creaking noise occurs | ❏ Advanced Iris applies a mechanical iris system. When Advanced Iris is set, a |
from the bottom part of the TV | natural creaking noise occurs due to the basic structure of the optical unit. The |
| creaking sound is an inherent nature of this system and is not a defect. |
|
|
The cooling fan is loud | ❏ If the TV is used at high altitudes and Cooling Mode is set to High, the cooling |
| fan runs faster and its sound becomes louder. If the TV is not used at high |
| altitudes, set Cooling Mode to Normal (see page 47). |
58