Basic Operations

Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.

Sony Equipment

Programmable Code Number

BD/DVD

101

(Sony Blu-ray Disc Player)

 

 

 

DVR/VCR

901

(Sony Dream System)

 

 

 

SAT/CABLE

801

(Sony Satellite Receiver)

 

 

 

Follow the steps below to program your TV’s remote control to operate non-

Sony video equipment.

Find the three-digit code for your equipment from the “Manufacturer’s Codes” listed on page 27. If more than one code number is listed, try entering from the code listed first.

1 Press and hold the BD/DVD , DVR/VCR or SAT/CABLE FUNCTION button you want to

program on the remote control and press the

DI

button simultaneously.

Y

 

S

 

 

P

 

 

L

 

 

A

 

The selected FUNCTION button (BD/DVD, DVR/VCR or

SAT/CABLE) will flash.

2Enter the three-digit manufacturer’s code number using the --9buttons while the FUNCTION button is lit. If the code is not entered within 10 seconds, you must start again from step 1.

3 Press the button while the FUNCTION button is lit.

When the programming is correct, the selected FUNCTION button blinks twice, and when not, blinks five times.

✍While BD/DVD , DVR/VCR and SAT/CABLE buttons are labeled as such, you can still program any of your connected equipment using any one of the buttons regardless of the label. For example, BD/DVD button can be programmed to operate your VCR. If you have a DVD/VCR combo that you want to operate with your TV remote control, you can program with the BD/DVD or DVR/VCR or even the SAT/CABLE , but remember which button you have programmed for your particular use.

To check if the code works

Aim your TV’s remote control at the equipment, and press the green POWER button. If you can turn the equipment on and off by using the remote control, then the programming is complete. If not, try the next code listed.

✍If no code is input within the above specified time, or an invalid or incorrect code number is input, the remote control automatically goes back to the previous setting.

✍In some cases, you may not be able to program your remote control to operate other equipment. In such cases, use the equipment’s own remote control.

26