Screen Saver | The “Screen Saver” option allows you to reduce image retention. |
If the following images are displayed for an extended period time, image | |
| |
| retention (afterimage) in areas of the screen may result due to the characteristics |
| of the Plasma Display Panel. |
•Black bars at the top and bottom that appear with a wide video source (Letterbox picture).
•Black bars to the left and right that appear with a 4:3 video source (conventional TV broadcasts).
•Video game sources
•DVD
•
To do this:
1After selecting this option, press OK.
2Press 
or 
to select the following option and press OK.
Then press 
or 
to move the picture position (Orbit), or turn the screen to white (All White) to reduce image retention.
All White: Select On to turn the screen to white.
Orbit: Select On to move the position.
•All White function finishes automatically after 30 minutes. If image retention is still present, repeat the above.
•To cancel All White function halfway, press any buttons (except the sound- related buttons) on the remote.
AV3 Output | The “AV3 Output” option allows you to select the source to be output from the Scart | ||||
| connector |
| / |
| S 3. You can record from this Scart any signal coming from the TV |
|
|
| |||
| or from external equipment connected to the other connectors. | ||||
If your VCR supports SmartLink, this procedure is not necessary.
To do this:
1After selecting this option, press OK.
2Press 
or 
to select the desired output signal: Auto, TV, AV1, AV2 or AV5.
•If you select Auto, the output signal will always be the same one that is displayed on the screen.
•If you have connected a decoder to the Scart connector 
/ 
S 3 or to a VCR connected to this Scart, please remember to set AV3 Output to TV for correct unscrambling.
•Even if AV3 Output is set to Auto, signals input through Y, PB/CB, PR/CR jacks of 
4 are not output from
Scart connector 
/ 
S 3.
Menu System 39