Problem | Possible remedies | |
|
| |
Distorted picture when changing programmes or | • Turn off any equipment connected to the Scart connector on the rear of | |
selecting Teletext | the TV. | |
|
| |
Wrong characters appear when viewing Teletext. | • Using the menu system, select the “Language” and “Country” options in | |
|
| the “Set Up” menu and set the language and country/region in which you |
|
| view Teletext (page 40). For Cyrillic languages, we recommend that you |
|
| select Russia in case your own country/region does not appear in the list. |
|
| |
Wrong characters appear when viewing NexTView. | • Using the menu system, select the “Language” and “Country” options in | |
|
| the “Set Up” menu and set the language and country/region in which |
|
| NexTView is provided (page 40). |
|
| |
Some input sources cannot be selected. | • Using the menu system, select the “AV Preset” option in the “Set Up” | |
|
| menu and cancel the “Skip” setting of the input source. |
|
| |
No sound/Noisy sound |
| |
| Good picture, no sound | • Press 2 +/– or % (Mute) on the remote control. |
|
| • Check that the “Speaker” option is set to “Main” in the “Features” menu |
|
| |
|
|
|
| Audio noise | • Make sure that the aerial is connected using the supplied coaxial cable. |
|
| • Keep the aerial cable away from other connecting cables. |
|
| • Do not use |
|
| |
Menu item is not displayed. | • Some items cannot be selected depending on the signal or other settings. | |
|
| Refer to the instructions on each menu item. |
|
| |
Strange sound |
| |
| The TV cabinet creaks. | • Changes in room temperature sometimes cause the TV cabinet to expand |
|
| or contract, which can make slight noises. This does not indicate a |
|
| malfunction. |
|
|
|
| The TV ticks. | • An electrical circuit inside the TV is activated when the TV is turned on. |
|
| This does not indicate a malfunction. |
|
|
|
| The TV buzzes. | • There might be a surge sound when turning on the TV. This does not |
|
| indicate a malfunction. |
|
| |
Remote control does not function. | • Check that the remote control is set correctly for the device you are using | |
|
| (VCR, TV, or DVD). |
|
| • If the remote control does not operate the VCR or DVD even when the |
|
| remote control has been set correctly to VCR or DVD, enter the |
|
| necessary code set as explained in “Remote Control Configuration for |
|
| |
|
| • Replace the batteries. |
|
|
|
The | (Power/Standby) indicator on the | • Refer to |
TV flashes. | Sony service centre. | |
|
|
|
Additional Information 63