C)Normally the automatic fine tuning (AFT) option will give the best possible picture, however you can manually
To do this:
1Press PROG +/– to select the programme number with the channel you want to fine- tune manually.
You cannot select the programme number set to skip in the “Skip” option (see step D on page 43).
2When the programme you want to
3Press 
or 
to adjust the fine tuning between
4Highlight the Confirm option and press OK. Then press 
to select OK and finally press OK to store your choice.
To restore automatic fine tuning, select On in step 3 above.
D)Skip any unwanted programme numbers when they are selected with the PROG +/– buttons.
To do this:
1Highlight the Programme option and press OK. Then press 
or 
to select the programme number you want to skip.
2When the programme you want to skip appears on the screen, select the Skip option and press OK.
3Press 
or 
to select Yes and press OK.
4Highlight the Confirm option and press OK. Then press 
to select OK and finally press OK to store your choice.
To cancel this function afterwards, select No instead of Yes in step 3 above.
E)View and record scrambled channels when using a decoder connected to the Scart
connector 
/ 
S 3 either directly or via a VCR.
Depending on the country/region you have selected in the “Country” option, this option may not be available (see page 40).
To do this:
1Press PROG +/– to select the programme number with the scrambled channel you want to view.
You cannot select the programme number set to skip in the “Skip” option (see step D on page 43).
2When the programme you want to view appears on the screen, select the Decoder option and press OK.
3Press 
or 
to select On and press OK.
4Highlight the Confirm option and press OK. Then press 
to select OK and finally press OK to store your choice.
To cancel this function afterwards, select Off instead of On in step 3 above.
Menu System 43