Picture menu
You can select the options listed below on the Picture menu. To select options in “Settings”, see “Navigating through menus” (page 17).
Target Inputs
Selects whether to apply settings made in the Picture menu to all inputs, or only to the input currently being watched.
“All”: Applies settings to all inputs.
“Viewing Only”: Applies settings only to the current input.
Picture Mode
Selects the picture mode.
“Vivid”: For enhanced picture contrast and sharpness.
“Standard”: For standard picture. Recommended for home entertainment.
“Custom”: Allows you to store your preferred settings.
Reset
Resets all picture settings except “Target Inputs” and “Picture Mode” to the factory settings.
Backlight | Adjusts the brightness of the backlight. |
|
|
Picture | Increases or decreases picture contrast. |
|
|
Brightness | Brightens or darkens the picture. |
|
|
Color | Increases or decreases color intensity. |
|
|
Hue | Increases or decreases the green tones. |
| Tip |
| “Hue” can only be adjusted for a NTSC color system (e.g., U.S.A. video tapes). |
|
|
Color Temperature | Adjusts the whiteness of the picture. |
| “Cool”: Gives the white color a blue tint. |
| “Neutral”: Gives the white color a neutral tint. |
| “Warm1”/“Warm2”: Gives the white color a red tint. “Warm2” gives a redder tint |
| than “Warm1”. |
| Tip |
| “Warm1” and “Warm2” can only be selected when you set “Picture Mode” to “Custom”. |
|
|