Setup menu
You can select the options listed below on the Setup menu. To select options in “Settings”, see “Navigating through menus” (page 17).
Auto Startup | Starts the “first time operation menu” to tune in all the available channels. Usually | |
| you do not need to do this operation because the channels are already tuned when the | |
| TV was first installed (page 5, 6). However, this option allows you to repeat the | |
| process (e.g., to retune the TV after moving house, or to search for new channels that | |
| have been launched by broadcasters). | |
|
| |
Language | Selects the language in which the menus are displayed. | |
|
| |
Video Labels | Assigns a name to any equipment connected to the side and rear jacks. The name will | |
| be displayed briefly on the screen when the equipment is selected. You can skip an | |
| input source that is not connected to any equipment. | |
| 1 | Press F/f to select the desired input source, then press . |
| 2 | Press F/f to select the desired option below, then press . |
|
| Equipment labels: Uses one of the preset labels to assign a name to connected |
|
| equipment. |
|
| “Edit:”: Creates your own label. Follow steps 2 to 4 of “Program Labels” (page 26). |
|
| “Skip”: Skips an input source that is not connected to any equipment when you press |
to select the input source.
Auto S Video | Selects the input signal from S video sockets | when | / 1/2 sockets are |
| both connected. |
|
|
|
|
|
|
Functions MENU Using
Continued