Screen menu

You can select the options listed below on the Screen menu. To select options in “Settings”, see “Navigating through menus” (page 17).

Target Inputs

Selects whether to apply settings made in the Screen menu to all inputs, or only to the input currently being watched.

“All”: Applies settings to all inputs.

“Viewing Only”: Applies settings only to the current input.

Wide Mode

For details about the wide mode, see page 15.

 

 

Auto Wide

Automatically changes the screen format according to the broadcast signal. To keep

 

your setting, select “Off”.

Tips

•Even if you have selected “On” or “Off” in “Auto Wide”, you can always modify the format

of the screen by pressing repeatedly.

•“Auto Wide” is available for PAL, SECAM and NTSC signals only.

4:3 Default

Selects the default screen mode for use with 4:3 broadcasts.

“Wide Zoom”: Displays conventional 4:3 broadcasts with an imitation wide screen effect.

“Normal”: Displays conventional 4:3 broadcasts in the correct proportions.

“Off”: Keeps the current “Wide Mode” setting when the channel or input is changed.

Tip

This option is available only if “Auto Wide” is set to “On”.

Display Area

Adjusts the screen area displaying the picture. “Normal”: Displays the picture in the original size. “–1”/“–2”: Enlarges the picture to hide the edge of the picture.

Horizontal Shift

Adjusts the horizontal position of the picture for each screen format.

 

 

Vertical Shift

Adjusts the vertical position of the picture when the screen format is set to “Zoom”.

 

 

Vertical Size

Adjusts the vertical size of the picture when the screen format is set to “Zoom” or

 

“Wide Zoom”.

 

 

22 GB