Sony KLV-26S200A, KLV-32S200A, KLV-40S200A, KLV-46S200A Sound menu, Sound Mode, Treble, Bass, Balance, Intelligent Volume, Volume Offset, Surround, BBE, 20 GB

You can select the options listed below on the Sound menu. To select options in “Settings”, see “Navigating through menus” (page 17).

Target Inputs

Selects whether to apply settings made in the Sound menu to all inputs, or only to the input currently being watched.

“All”: Applies settings to all inputs.

“Viewing Only”: Applies settings only to the current input.

Selects the sound mode.

“Dynamic”: Enhances treble and bass.

“Standard”: For standard sound. Recommended for home entertainment.

“Custom”: Flat response. Also allows you to store your preferred settings.

Reset

Resets all the sound settings except “Target Inputs”, “Sound Mode” and “Dual Sound” to the factory settings.

Treble	Adjusts higher-pitched sounds.

Bass	Adjusts lower-pitched sounds.

Balance	Emphasizes left or right speaker balance.

Intelligent Volume	Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend
	to be louder than programs).

Volume Offset	Increases or decreases the sound level.

Surround	Selects the surround mode.
	“TruSurround XT”: For surround sound (for stereo program only).
	“Simulated Stereo”: Adds a surround-like effect to mono programs.
	“Off”: For normal stereo or mono reception.

Gives sound more impact by compensating for phase effects in speakers using the “BBE High Definition Sound System”.

“High”: The sound is reproduced with more impact.

“Low”: The sound is reproduced with impact.

“Off”: For normal stereo or mono reception.