Channel Setup menu

You can select the options listed below on the Channel Setup menu. To select options in “Settings”, refer to “Picture menu” (page 21).

1 Digit Direct

When “1 Digit Direct” is set to “On”, you can select a channel using one preset

 

number button (0 - 9) on the remote.

 

Note

 

When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering

 

two digits using the remote.

 

 

Auto Tuning

Tunes in all the available channels.

 

Usually you do not need to do this operation because the channels are already tuned

 

when the TV was first installed (page 7). However, this option allows you to repeat

 

the process (e.g. to retune the TV after moving house, or to search for new channels

 

that have been launched by broadcasters).

 

 

Program Sorting

Changes the order in which the channels are stored on the TV.

 

1

Press F/f to select the channel you want to move to a new position,

 

 

then press .

 

2

Press F/f to select the new position for your channel, then press .

 

 

Program Labels

Assigns a channel name of your choice up to five letters or numbers. The name will

 

be displayed briefly on the screen when the channel is selected.

 

1

Press F/f to select the channel you want to name, then press .

 

2

Press F/f to select the desired letter or number (“_” for a blank space),

 

 

then press g.

 

 

If you input a wrong character

 

 

Press G/g to select the wrong character. Then, press F/f to select the correct

 

 

character.

 

 

To delete all the characters

 

 

Select “Reset”, then press .

 

3

Repeat the procedure in step 2 until the name is complete.

 

4

Select “OK”, then press .

 

 

Program Block

Blocks an individual channel from being watched.

 

1

Press F/f to select the channel you want to block, then press .

 

2

Press F/f to select “Block”, then press .

To watch the channel, select “Allow”.

Functions MENU Using

Continued

31 GB