Manual Program Preset
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”, press PROG +/- to select the program number with the channel. You cannot select a program number that is set to skip.
Program/TV System
Presets program channels manually.
1Press F/f to select “Program”, then press .
2Press F/f to select the program number you want to manually tune (if tuning a VCR, select channel 00), then press .
3Press F/f to select “TV System”, then press .
4Press F/f to select the best received TV broadcast systems, then press .
5Press F/f to select “VHF Low”, “VHF High” or “UHF”, then press .
6Press G/g until the desired channel’s broadcast appears on the TV screen, then press .
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected.
To input characters, follow steps 2 to 4 of “Program Labels” (page 31).
AFT
Allows you to
You can adjust the fine tuning over a range of
Audio Filter
Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a
If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting “Off”.
Note
You cannot receive stereo or dual sound when “Low” or “High” is selected. Normally noise can be reduced with “Low”. If you still feel the sound is noisy, set the filter to “High”.
Skip
Skips unused channels when you press PROG +/- to select channels. (You can still select a skipped channel using the number buttons.)
Sensitivity
Adjusts the TV reception sensitivity if the TV signal is too strong and the picture is distorted. Press f to select “Low”, then press .
Color System
Selects the color system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, or “NTSC4.43”) according to the channel.