ProblemCause/Remedy
Picture flashes initially when changing to HDMI mode or switching on the TV with HDMI mode.
•This is probably caused by the authentication process between HDMI equipment and the TV. It does not indicate a malfunction.
Sound
Problem | Cause/Remedy | |
|
| |
No sound, but good picture | • Press 2 +/– or % (Mute). | |
| • | Check that “Speaker” is set to “On” in the “Setup” menu (page 29). |
|
|
|
Noisy sound | • | See “Picture noise” causes/remedies on page 41. |
|
|
|
Channels
Problem | Cause/Remedy | |
Some channels are blank | • | Scrambled/Subscription only channel. Subscribe to the Pay Per View |
|
| service. |
| • | Contact the broadcaster for transmission details. |
|
|
|
General
Problem | Cause/Remedy |
The TV turns off automatically | • Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of |
(the TV enters standby mode) | “On Timer” (page 28). |
|
|
The TV turns on automatically | • Check if the “On Timer” is activated (page 28). |
|
|
Some input sources cannot be | • Select “Video Labels” in the “AV Setup” menu and cancel “Skip” of the |
selected | input source (page 30). |
|
|
The remote does not function | • Check that the remote is set correctly for the equipment you are using. |
| • Check whether the equipment you want to use corresponds to the function |
| button being pressed (page 14). |
| • If the remote does not operate the equipment even when the remote has been |
| set correctly to the equipment, enter the necessary code as explained in |
| |
| • Replace the batteries. |
|
|