Ventilation
Leave space around the LCD TV. Otherwise, adequate aircirculation may be blocked causing overheating and cause fire or damage the LCD TV.
When installing the LCD TV on the wall
30cm
10cm10cm
10cm
Leave at least this space around the set.
Never install the LCD TV as follows:
Air circulation is blocked.
Wall
When installing the LCD TV using a stand
30cm
10cm | 10cm | 6cm |
Leave at least this space around the set.
Never install the LCD TV as follows:
Air circulation is blocked.
Wall
Power Sources
Overloading
This LCD TV is designed to operate on a
When not in use
• If you will not be using the TV set for several days, the TV set should be disconnected from the AC power outlet for environmental and safety reasons.
•The TV set is not disconnected from the AC power source when the TV set is switched off. To disconnect the TV set completely, pull the plug from the AC power outlet.
However, some TV sets may have features which need the TV set to be left in standby to work correctly. The instructions in this manual will inform you if this applies.
AC power outlet
Do not use a poor fitting AC power plug. Insert the plug fully into the AC power outlet. If it is loose, it may cause arcing and result in fire. Contact your electrician to have the AC power plug changed.
When you disconnect the AC power cord, disconnect it from the AC outlet first.
For the TV set with a
This TV set with CLASS 1 construction must be connected to an AC mains socket outlet with a protective earthing connection.
Moisture
Do not touch the AC power cord with a wet hand. If you plug/unplug the AC power cord with a wet hand, it may cause electric shock.
Lightning storms
For your own safety, do not touch any part of the LCD TV, AC power cord or antenna lead during lightning storms.
AC power cord protection
Pull out the AC power cord by the plug. Do not pull on the AC power cord itself.
Continued