C)Normally the automatic fine tuning (AFT) option will give the best possible picture, however you can manually fine-tune the TV to obtain a better picture if the picture is distorted.

To do this:

1Press PROG +/to select the programme number with the channel you want to fine- tune manually.

You cannot select the programme number set to skip in the “Skip” option (see step D on page 31).

2When the programme you want to fine-tune appears on the screen, select the AFT option and press OK.

3Press or to adjust the fine tuning between –15 and +15 and press OK.

4Highlight the Confirm option and press OK. Then press to select OK and finally press OK to store your choice.

To restore automatic fine tuning, select On in step 3 above.

D)Skip any unwanted programme numbers when they are selected with the PROG +/buttons.

To do this:

 

 

 

1 Highlight the Programme option and press OK. Then press

or

to select the

 

GB

programme number you want to skip.

 

 

 

2When the programme you want to skip appears on the screen, select the Skip option and press OK.

3Press or to select Yes and press OK.

4Highlight the Confirm option and press OK. Then press to select OK and finally press OK to store your choice.

To cancel this function afterwards, select No instead of Yes in step 3 above.

E)View and record scrambled channels when using a decoder connected to the Scart

connector / S 2 either directly or via a VCR.

Depending on the country/region you have selected in the “Country” option, this option may not be available (see page 28).

To do this:

1Press PROG +/to select the programme number with the scrambled channel you want to view.

You cannot select the programme number set to skip in the “Skip” option (see step D on page 31).

2When the programme you want to view appears on the screen, select the Decoder option and press OK.

3Press or to select On and press OK.

4Highlight the Confirm option and press OK. Then press to select OK and finally press OK to store your choice.

To cancel this function afterwards, select Off instead of On in step 3 above.

Menu System 31