Using Optional Equipment

1 Connect your equipment to the designated TV socket, as indicated on pages 37 to 41.

2 Switch on the connected equipment.

3 To watch the picture of the connected equipment, press the / button on the remote control repeatedly until the correct input symbol appears on the screen.

Symbol

 

 

Input Signals

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 or

 

2

• Audio/video input signal through the Scart connector Jor I.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

• RGB input signal through the Scart connector J. This symbol appears only if an

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RGB source has been connected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S 2

 

 

• S video input signal through the Scart connector I.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

• Component input signal through the Y, PB/CB, PR/CR jacks Cand audio input

 

 

 

 

 

 

 

 

 

 

 

 

signal through D.

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

• Video input signal through the phono jack Fand audio input signal through G.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S 4

 

 

• S video input signal through the S video input jack Eand audio input signal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

through G.

 

 

 

 

 

 

 

 

 

 

4 Press the button on the remote control to return to the normal TV picture.

/ 1 Scart connector (J) outputs the video signal from only the TV tuner.

For mono equipment

Connect the phono plug to the L/G/S/I jack and press

 

/

repeatedly until the input symbol

 

4 or

 

S 4 appears on the

 

 

 

screen.

Select the “Sound Adjustment” menu and set “Dual Sound” to “A” (see page 24).

42Additional Information