Picture Adjustment
Mode:Custom
Contrast:50
Brightness: 50
Colour:25
Hue:0
Sharpness: 25
Backlight:5
Colour Tone: Cool
Noise Reduction: Auto
Dynamic Picture: On
Gamma Correction: 0
Reset
Select: | Set: OK Back: | End: MENU |
You can select the options listed below on the Picture Adjustment menu. To select options, see “Navigating through menus” (page 19).
Tip
When you set “Mode” to “Vivid” or “Standard”, you can adjust only “Mode”, “Contrast”, “Colour Tone”, “Noise Reduction”, and “Reset”.
Mode
Selects the picture mode.
1Press OK to select “Mode”.
2Press M/m to select one of the following picture modes, then press OK.
Vivid: For enhanced picture contrast and sharpness.
Standard: For standard picture. Recommended for home entertainment.
Custom: Allows you to store your preferred settings.
Tip
You can also change the picture mode by pressing 
repeatedly.
Contrast/Brightness/Colour/Hue/Sharpness/Backlight
1Press OK to select the option.
2Press </, to set the level, then press OK.
Tip
“Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).
Colour Tone
1Press OK to select “Colour Tone”.
2Press M/m to select one of the following, then press OK.
Cool: Gives the white colours a blue tint.
Neutral: Gives the white colours a neutral tint.
Warm: Gives the white colours a red tint.
Menu the Using
Continued