AV Preset
Assigns a name to any equipment connected to the side and rear sockets. The name will be displayed briefly on the screen when the equipment is selected. You can skip an input source that is not connected to any equipment.
1Press OK to select “AV Preset”.
2Press M/m to select the desired input source, then press OK.
3Press M/m to select the desired option below, then press OK.
| Option | Description |
|
|
Equipment labels | Uses one of the preset labels to assign a name to connected |
| equipment. |
|
|
Edit | Creates your own label. Follow steps 3 to 5 of “Programme Labels” |
| |
|
|
Skip | Skips an input source that is not connected to any equipment when |
| you press M/m to select the input source. |
|
|
Manual Programme Preset
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/- to select the programme number with the channel. You cannot select a programme number that is set to skip (page 33).
1Press OK to select “Manual Programme Preset”.
2Press M/m to select one of the following options, then press OK.
Menu the Using
Continued