General
Problem | Possible Remedies |
How to restore Video settings | s Press RESET on the remote control while in the Video Menu (see page 78). |
to factory settings |
|
|
|
How to restore Audio settings | s Press RESET on the remote control while in the Audio Menu (see page 80). |
to factory settings |
|
|
|
Cannot cycle through the other | s Be sure the Video Label option is not set to Skip (see page 90). |
video equipment connected to |
|
the TV |
|
|
|
Cannot operate Menu | s If a menu option appears in gray, this indicates that the menu option is not |
| available. |
|
|
Lost password | s In the password screen (see page 86), enter the following master password: 4357. |
| The master password clears your previous password; it cannot be used to |
| temporarily unblock channels. |
|
|
LED on the display unit is lit | s The POWER ON/STAND BY LED (see page 16) lights up when the TV is turned |
| on. If the LED blinks continuously, this may indicate the TV needs a service. |
| s The TIMER LED (see page 16) indicates that the timer is set. When the timer is |
| set, this LED will remain lit even when the TV is turned off. |
|
|
Other Info
100