Sony KLV30XBR900 VCR and Cable

Setup

VCR and Cable	For best results, use this connection if:
	s Your cable company does not require you to use a cable box.
	About Using This Connection with Dual Picture (Twin View, etc.) Features
	With this connection, you can use all the dual picture features.

To connect the VCR and cable

1Connect the CATV cable to the VCR’s VHF/UHF input jack.

2Use the supplied antenna cable to connect the VCR’s VHF/UHF output jack to the TV’s VHF/UHF jack.

3Use an A/V cable to connect the VCR’s A/V output jacks to the TV’s A/V input jacks.

4Run the Auto Setup program, as described in “Setting Up the Channel List” on page 49.

Using S VIDEO jacks? See page 29.

Rear of Media receiver unit

				TO		Antenna cable (supplied)
AUDIO	R–AUDIO–L	SUBWOOFER	VHF/UHF	CONVERTER AUX
OUT		OUT
(VAR/FIX)		(VAR)
		1	DVI–HDTV		R–AUDIO–L	6
		3		DVI–HDTV	IN	VCR
			WHITE		BLACK
R–	–L VIDEO	S VIDEO
			DISPLAY SIGNAL OUT

CATV cable

A/V cable

30