Media receiver unit
Front Panel
|
|
| CHANNEL + | INPUT SELECT |
POWER |
|
|
|
|
POWER | ON/OFF TIMER | TV VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 VIDEO6 MEMORY STICK | VOL – | VOL + |
|
|
| CHANNEL – | MTS/SAP |
|
|
|
| |
|
| S VIDEO | VIDEO |
|
VIDEO 2 INPUT
ItemDescription
1Main POWER Press to turn on and off the main power of the TV Set.
2POWER LED Lights up in green when the TV set is turned on. The LED lights up in red when in standby mode. The LED does not light up when the main power is turned off. If the LED blinks continuously, this may indicate the Media receiver unit needs servicing (see “Contacting Sony” on page 96).
3ON/OFF TIMER When lit, indicates one of the timers is set. When the timer
| LED | is set, this LED will remain lit even if the TV set is turned |
|
| off. For details, see page 89. |
|
|
|
4 | MEMORY | Memory Stick insertion slot. For details, see “Inserting and |
| STICK | |
|
|
|
5 | MEMORY | When lit, indicates that the Memory Stick is being read. |
| STICK ACCESS (Do not remove the Memory Stick when the indicator is lit.) | |
| LED |
|
6INPUT SELECT Press repeatedly to cycle through the video equipment connected to the Media receiver unit’s video inputs.
7 MTS/SAP | Press repeatedly to cycle through the |
| Sound (MTS) options: Stereo, Auto SAP, and Mono. For |
| details on each option, see page 80. |
8– CHANNEL + Press to scan through channels. To scan quickly through channels, press and hold down either CHANNEL.
–VOLUME + Press to adjust the volume.
9 | VIDEO/ | Connects to the composite A/V output jacks on your |
| camcorder or other video equipment. | |
| (VIDEO 2 |
|
| INPUT) |
|
|
|
|
0 | S VIDEO | Connects to the S VIDEO OUT jack on your camcorder or |
| (VIDEO 2 | other video equipment that has S VIDEO. Provides better |
| INPUT) | picture quality than composite video (9). |
|
|
|
Setup
17