To connect the cable box
1Connect the CATV cable to the cable box’s input jack.
2Use the supplied antenna cable to connect the cable box’s output jack to the TV’s VHF/UHF jack.
3Run the Auto Setup program, as described in “Setting Up the Channel List” on page 49.
CATV Antenna cable
cable (supplied) VHF/UHF
Setup
IN | OUT |
| Cable box |
Notes on Using This Connection
To Do This ... | Do This ... |
Use the cable box | Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then |
| use the cable box to switch channels. |
|
|
Set up the TV remote control to | Program the remote control. See “Programming the Remote Control” on page 54. |
operate the cable box |
|
|
|
Activate the remote control to | Press FUNCTION repeatedly until the SAT/CABLE indicator lights up. |
operate the cable box |
|
|
|
Prevent the accidental switching | When using the cable box, you need the TV to stay on the channel the cable box is |
of TV channels | set to (usually channel 3 or 4). You can use the TV’s Channel Fix feature to lock in a |
| specific channel. For details, see “Using the Channel Menu” on page 84. |
|
|
28