Installing and Connecting the TV

Connecting a Satellite Receiver

Disconnect all power sources before making any connections.

1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.

2 Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.

3 Connect the supplied 75-ohm coaxial cable from your cable or antenna to the TV’s VHF/UHF jack.

Rear of TV

75-ohm coaxial cable (supplied)

S VIDEO

Satellite receiver

VIDEO (yellow)

AUDIO-L (white)

Satellite

antenna

cable

AUDIO-R (red)

S VIDEO cable (not supplied)

AUDIO cable (not supplied)

Note

To watch the pictures input from the S VIDEO input jack, set “Auto YC” to “On” in the (Setup) menu (See page 12).

Tips

•You can also use the VIDEO 2 IN jacks to connect your satellite receiver.

•If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.

13