To program a cable box or a satellite receiver Press SAT/CABLE (FUNCTION).
To program video equipment Press VCR/DVD (FUNCTION).

Watching the TV

Operating Video Equipment with Your TV Remote Control

Programming the remote control

5

3

4

The remote control is preset to operate Sony video equipment.

Sony equipment

Programmable code number

Beta, ED Beta VCRs

303

 

 

8mm VCR

302

 

 

VHS VCR

301

 

 

DV VCR

348

 

 

DVD player

751

 

 

If you have video equipment other than Sony video equipment that you want to control with the TV’s remote control, use the following procedures to program the remote control.

Note

The equipment must have infrared (IR) remote capability in order to be used with this remote control.

From the “Manufacturer’s codes” listed on page 35, select the three-digit code number for the manufacturer’s code of your equipment. If more than one code number is listed, start with the number listed first. Use the code number to complete the following procedure.

1Press CODE SET.

2Press the function button you want to program.

2

1

3Enter the three-digit manufacturer’s code number using the 0-9 buttons.

4Press ENT (enter).

5To check if the code number works, aim the TV’s remote control at the equipment and press the VCR/DVD and/or SAT/CABLE (POWER) button that corresponds with that equipment. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer.

Tips

•If more than one number is listed, try entering them one by one until you come to the correct code for your equipment.

•If you enter a new code number, the code number you previously entered at that setting is erased.

•In some rare cases, you may not be able to operate your equipment with the Sony remote control. In this case, use the equipment’s own remote control unit.

34