Sony KLV S15G10, KLV S20G10 Notes on Using This Connection, cable (yellow) instead of the S VIDEO cable, To connect a DVD player with S VIDEO and audio connectors

Connecting the TV

KLV-S20G10		Rear of TV
		VIDEO 4 IN (480p/480i)	VIDEO 3 IN
		R-AUDIO-L	R-AUDIO-L(MONO)VIDEO
	AUDIO-L (white)	PR PB Y
	AUDIO-R (red)		R-AUDIO-L(MONO)VIDEO S VIDEO
			VIDEO 1 IN

Audio cable

DVD Player

Y

PB

PR

Component video cable

TV the Connecting

Notes on Using This Connection

To Do This ...	Do This ...
Watch the DVD player	Press TV/VIDEO repeatedly to select the DVD player input or Video 4. (For KLV-
	S15G10 model, select Video 3.)
Set up the remote control to	If you have a non-Sony DVD player, you must program the remote control. See
operate the DVD player	“Programming the Remote Control” on page 34.
Activate the remote control to	Press VCR/DVD (FUNCTION).
operate the DVD player
Control DVD functions with the	See “Operating a DVD Player” on page 36.
remote control
Label video inputs to easily	See the instructions for setting up Label Video Inputs on page 51.
identify equipment connected to
the TV
	To connect a DVD player with S VIDEO and audio connectors
	If your DVD player does not have component video (YPBPR) jacks, or the
	component video inputs are already connected to another device, use this
	connection.
	1 Use an S VIDEO cable to connect the DVD player’s S VIDEO output
	jack to the TV’s S VIDEO input jack (VIDEO 1 IN).
	2 Use an audio cable to connect the DVD player’s AUDIO output jacks to
	the TV’s AUDIO input jacks (VIDEO 1 IN).
	If your DVD player is not equipped with S VIDEO, use a VIDEO
	cable (yellow) instead of the S VIDEO cable.

29