Optional Connections

Using Optional Equipment

Additional Information when connecting equipment

Connecting a VCR

We recommend you connect your VCR to the Dor Esocket using a scart lead. If you do not have a scart lead, use the “Manually Tuning the TV” section of this instruction manual to tune in the VCR signal to TV programme number “0”.

If your video supports Smartlink please refer the "Smartlink" section of this instruction manual.

Connecting to External Audio Equipment

1To listen to the audio of your projection TV on the Hi-Fi equipment:

Plug in your Dolby Prologic system decoder amplifier to the Bsockets on the rear of the projection TV if you wish to amplify

the audio output from the TV.

The output level from Bsockets can be varied by adjusting the volume of the headphones. Refer to the “Adjusting the sound” section of this instruction manual to adjust the volume of the headphones.

To enjoy “Dolby Virtual” sound effect through your Hi-Fi equipment:

Place the speakers of your equipment in front of your sitting place and besides the TV set but keeping a distance of 50 cm from each speaker to the TV set.

Then by using the menu system, select the menu “Sound Control” and set “Dolby Virtual” to “On”.

Left Hi-Fi

Right Hi-Fi

Speaker

Speaker

~50º

GB

2 To listen to the Dolby amplifier equipment on the projection TV speakers:

Your sitting position

Plug in your Hi-Fi equipment to the Asocket on the rear of the projection TV if you wish to listen to the audio output from your Hi-Fi on the projection TV speaker. If you have a Dolby amplifier, connect the centre output from your amplifier

to the Asocket to use the projection TV as a centre speaker. Refer to the “Adjusting the Sound” section of this instruction manual and set the option "Speaker" to "Centre in".

For mono equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select the 2 input signal using the instructions on this page below.

Select and View the Input Signal

1 Connect your equipment to the designated projection TV socket, as it is indicated on the

VIDEO TV

previous page.

 

2 Switch on the connected equipment.

3 Press the button repeatedly on your remote control until the correct input symbol appears on the screen.

1 2 3

4 5 6

7 8 9

0

PROGR

MENU

RM 892

S

Symbol

Input signals

k• Audio/video input signal through the Euro AV connector C

• RGB input signal through the Euro AV connector C

K• Audio/Video input signal through the Euro AV connector Dor the phono sockets Hand G.

q2 • Audio/S Video input signal through the Euro AV connector Dor the sockets Hand F.

…3 • Audio/Video input signal through the Euro AV connector E.

4 To return to the normal TV picture, press the button on the remote control.

Optional Connections

27