Inserting Batteries into the Remote Control
Make sure you insert the batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
Connecting the Aerial and VCR
VCR
or
OUT IN
The Scart lead is optional.
If you use this optional connection it can improve picture and sound quality when using a VCR.
If you do not use a SCART lead, after automatically tuning the projection TV refer to the “Manually Tuning the TV” section of this instruction manual, to the tune in the set to the ouput of you VCR. Also refer to your VCR instruction manual to find out how to find the output channel of your VCR.
Switching on the projection TV
Connect the projection TV plug to the mains socket (220- 240V AC, 50Hz).
Push in the 
On/Off switch on the front of the projection TV.
8 Getting Started - Installation