Getting Started - First Time Operation
Automatically Tuning the TV using the Remote Control
You need to tune the set to receive channels (TV Broadcast). By following the instructions below, this projection TV automatically searches and stores all available channels for you.
After having selected the language, a new menu appears automatically on the projection TV screen asking you to automatically tune the TV. However, if you need to change or repeat the tuning afterwards (e.g. when you move house), select the menu Auto Programme in the 
(PRESET) menu and proceed in the same way as described below or, please refer to the section "Automatically Tuning the TV" of this instruction manual.
VIDEO TV
1 2 3
4 5 6
7 8 9
0
PROGR
MENU
RM 892
S
1 Press the OK button on the remote control to select YES. A new menu appears automatically on the screen asking you to check that the antenna is connected.
2 Confirm that the antenna is connected and then press the OK button.
The automatic tuning starts and the message "AUTO
PROGRAMME" flashes on the screen.
This procedure could take some minutes. Please, be patient and do not press any button, otherwise the automatic tuning will not be completed.
When the automatic tuning is finished, the Programme Sorting menu appears on the screen.
Notes: • To stop the automatic tuning, press the MENU button.
•If you stop the automatic tuning by pressing the MENU button, the Programme Sorting menu does not appear automatically on the screen.
Do you want to start automatic tuning?
Yes
No
Confirm: OK
Please confirm that antenna is connected
Confirm: OK
AUTO PROGRAMME
PROG SYS CH LABEL
1B/G C 26 - - - - -
AUTO PROGRAMME
PROGRAMME SORTING
PROG | SYS | CHAN | LABEL | |
0 | B/G | C 28 | ||
1 | B/G | C 40 | ||
2 | B/G | C 41 | ||
3 | B/G | C 31 | ||
4 | B/G | C 34 | ||
5 | B/G | C 27 | TELE 5 | |
6 | B/G | C 47 | C PLUS | |
7 | B/G | C | 44 | - - - - - |
8 | B/G | C | 23 | - - - - - |
9 | B/G | C 35 | CNN - | |
Select PROG: |
| + OK | ||
Exit: MENU |
|
|
| |
10 Getting Started - First Time Operation