Optional Connections

Smartlink

Smartlink is a direct link between your projection TV set and a VCR.

For Smartlink you need:

• A VCR which supports Smartlink, NextView Link, Easy Link or Megalogic.

Megalogic is a trademark of Grundig Corporation.

EasyLink is a trademark of Philips Corporation.

•A fully-wired 21 pin SCART cable to connect your VCR to the Euro AV connector :3 (SMARTLINK) on the rear of the Projection TV.

The features of Smartlink are:

•Tuning information such as the channel overview are downloaded from the Projection TV set to the VCR.

•Direct projection TV recording: While watching TV you need to press just one button on the VCR to record this programme.

•Projection TV in standby mode: Press the "Play z" button on your VCR to switch the TV automatically on.

If you have connected a decoder to a VCR which supports Smartlink feature, select the

menu Further Programme Preset in the (PRESET) menu and select DECODER AV3 to each codified channel. For more details, please refer to the section "Using the Further Programme Preset function" of this instruction manual.

For more information on Smartlink, please refer to the Instruction Manual of your VCR.

Rear of projection TV

VCR

Decoder

Remote Control of other Sony Equipment

Using the buttons underneath the cover of the remote control you can control other Sony equipment.

1 Open the cover of the Remote Control.

2 Set the selector VTR 1234 DVD according to the equipment you want to control: VTR 1 Beta VCR

VTR 2 8 mm VCR VTR 3 VHS VCR

VTR 4 Digital Video (DCR-VX 1000/9000 E, VHR-1000) DVD Digital Video Disk

3 Use the buttons underneath the cover on the remote control to operate the equipment.

•If your video equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector on the TV Remote Control.

•If the equipment does not have a certain function, the corresponding button on the remote control does not work.

VIDEO TV

VTR1234 DVD

CH

VTR1234 DVD

CH

28

Optional Connections