Sony KP-41T35 16

Press V or v to select CHANNEL ERASE/ADD,

and press .

The CHANNEL ERASE/ADD menu appears.

CHANNEL ERASE/ADD

ERASE ADD

Use[0 – 9]or [CH+/–] to select the channel.

Use

Exit MENU

Erase and/or add channels:

To erase an unwanted channel

(1)Make sure the cursor (z) is beside ERASE.

(2)Press CH +/– or the 0 – 9 buttons to select the channel you want to erase, and press ENTER.

CH				Selected channel number
CH
	1	2	3	CHANNEL ERASE/ADD
	1	2	3	ERASE	33
or	4	5	6	ERASE
or	4	5	6	ADD
				MENU
	7	8	9	Use[0 – 9]or [CH+/–]
		0	ENTER	to select the channel.
		0		Use	Exit MENU
				Use	Exit MENU

(3)Press .

The “–” indication appears beside the channel number, showing that the channel is erased from the preset memory.

To add a channel that you want

(1)Press V or v to move the cursor (z) to ADD.

(2)Press the 0 – 9 buttons to select the channel you want to add, and press ENTER.

			Selected channel number
1	2	3	CHANNEL ERASE/ADD
			ERASE	33
4	5	6	ERASE
4	5	6	ADD
7	8	9	MENU
7	8	9
	0	ENTER
	0
			Use	Exit MENU

(3)Press .

The “+” indication appears beside the channel number, showing that the channel is added to the preset memory.

6 To erase and/or add other channels, repeat step 5.

7 Press MENU to return to the original screen.

Notes

•If you erase or add a VHF or UHF channel, the cable TV channel with the same number is also erased or added, and vice versa.

•Erasing and adding channels is also available for the AUX input.

Adjusting convergence

(CONVERGENCE)

The projection tube image appears on the screen in three layers (red, green and blue). If they do not converge, the color is poor and the picture blurs. To correct this, adjust convergence.

You do not have to do this procedure if you perform AUTO SET UP (page 14). Do this procedure only when you want to adjust it manually.

1 Press MENU.

2 Press V or v to select , and press .