MDP manufacturer code numbers
Manufacturer | Code number |
Sony | 701 |
Kenwood | 707 |
Magnavox | 703 |
Maranz | 702 |
Mitsubishi | 702 |
Panasonic | 704 |
Philips | 703 |
Pioneer | 702 |
RCA | 702 |
Sanyo | 706 |
Sharp | 705 |
Yamaha | 703 |
Notes
•If more than one code number is listed, try entering them one by one, until you come to the correct code for your equipment.
•In some rare cases, you may not be able to operate your non- Sony video equipment with the supplied remote control. This is because your equipment may use a code that is not included with this remote control. In this case, please use the equipment’s own remote control unit.
•The code numbers for Sony equipment are assigned at the factory as follows:
VHS VCR | 301 | (preset code for the supplied |
|
| remote control) |
8 mm VCR | 302 |
|
Beta, ED Beta VCRs | 303 |
|
•Whenever you remove the batteries — to replace them, for example — if too much time is taken, the code number may revert to the factory setting and must be reset.
Operating video equipment
VTR (POWER)
VTR (FUNCTION)
Video operating buttons
1 2 3
4 5 6 | 0 – 9 buttons |
7 8 9
0ENTER
CH +/–
Use the video operating buttons on the remote control to operate the video equipment.
Press VTR (FUNCTION) before operating the video equipment.
Operating a VCR | Buttons on the remote control |
To turn on or off | Press VTR (POWER). |
To select a channel | Press the 0 – 9 buttons. |
directly |
|
To change channels | Press CH |
To record | Press (while pressing r. First release |
| (, then release r. |
To play | Press (. |
To stop | Press p. |
To fast forward | Press ). |
To rewind the tape | Press 0. |
To pause | Press P. |
| To resume normal playback, press again. |
To search the picture | Press )or 0during playback. |
forward or backward | To resume normal playback, release the |
| button. |
To change input mode | Press TV/VTR. |
Operating an MDP | Buttons on the remote control |
To turn on or off | Press VTR (POWER). |
To play | Press (. |
To stop | Press p. |
To pause | Press P. |
| To resume normal playback, press again. |
To search the picture | Keep pressing )or 0during |
forward or backward | playback. |
| To resume normal playback, release the |
| button. |
To search the chapter | Press CH |
forward and backward |
|
|
|
Note |
|
•If the video equipment does not have a certain function, the corresponding button on this remote control will not operate.