Basic Set Up (continued)
Right side
only
MAIN POWER
Front panel
FLASH FOCUS TV/VIDEO – VOLUME + | – CHANNEL + POWER TIMER/STAND BY |
Inside the
FLASH FOCUS TV/VIDEO
SET UP MENU
1Turn on the projector TV.
2Press POWER on the projection TV. The TIMER/STANDBY indicator lights in green.
MAIN POWER | POWER |
For KP-43T75C/53SV75C/61SV75C o n l y
Press POWER on the projector TV.
POWER
2Press SET UP inside the
The AUTO SET UP screen appears.
SET UP 
3Press CHANNEL +, CHANNEL – or VOLUME + to select the desired on- screen language: English, Español or Português
The screen will change to reflect your choice.
– VOLUME + | – CHANNEL + |
4Press VOLUME – to continue.
–VOLUME +
¿Continuar
Auto Programaci ón?
S í | : | [ C H + ] |
N o | : | [ C H – ] |
For KP-43T75A/53SV75A only
1Depress MAIN POWER on the right side of the porjection TV.
The projection TV enters standby mode and the TIMER/STANDBY indicator lights in red.
KP-43T75A/53SV75A only
E n g l i s h : | [ C H + ] |
E s p a ñ o l : | [ C H – ] |
P o r t u g u ê s : | [ V O L + ] |
A u t o S e t U p : | [ V O L – ] |
Primero conecte el cable/antena.
Oprima [ SET UP ] para salir.
KP-43T75C/53SV75C/ 61SV75C only
E n g l i s h : |
| [ C H + ] |
E s p a ñ o l : |
| [ C H – ] |
F r a n ç a i s | : | [ V O L + ] |
A u t o S e t | U p : | [ V O L – ] |
Primero conecte el cable/antena.
Oprima [ SET UP ] para salir.
1 2
5Press CHANNEL + to preset channels automatically.
–CHANNEL +
Auto Programaci ón
“Auto Programación” appears and the projection TV starts scanning and presetting channels automatically. While scanning, the received channel will be displayed on the sub screen. When all the receivable channels are stored, the lowest numbered channel is displayed.
To perform AUTO SET UP again
Press SET UP inside the
Press SET UP again to exit.
Adjusting the Convergence Automatically (FLASH FOCUS)
The projection tube image appears on the screen in three layers (red, green and blue). If they do not converge, the color is poor and the picture blurs.
Before you use your projection TV, be sure to adjust the convergence.
The FLASH FOCUS feature allows you to adjust the convergence automatically.
Tips z
•It is recommended to perform FLASH FOCUS about 30 minutes after the projection TV is first turned on.
•You can also perform FLASH FOCUS using the Ajustes menu on page 29.
FLASH FOCUS
Press FLASH FOCUS.
The cross pattern appears and FLASH FOCUS begins to work. The adjustment is completed when the cross pattern becomes white.
Note:
•FLASH FOCUS is canceled if you perform any other function while FLASH FOCUS is working.
1 3
– 13 –
