Sony KP-53SV75A BAR Display Position Adjustment OP-DISP, Text Position Adjustment CCD-CCHP

KP-43T75A/53SV75A

RM-Y906 RM-Y906

5-5. BAR DISPLAY POSITION ADJUSTMENT (OP-DISP)

1.Receive the NTSC monoscope signal.

2.Set to service mode.

3.Push “ PICTURE +” . (Bar is displayed)

4.Select “ OP-DISP ” , and adjust so that the bar is as shown in the figure.

5.Write the data into memory. MUTING n ENTER

X1 X2

X1 = X2

Fig. 5-5

5-6. PIP POSITION ADJUSTMENT (PI-PIPH, PIPV, PPH5, PPV5)

1.Set the PIP mode.

2.Receive the NTSC monoscope signal on the main/sub picture.

3.Check the sub picture position.

X1-X2 0.25sq

X1-X2 0.25sq

4.If necessary set to service mode and adjust "PIPH", "PIPV".

5.Write the data into memory. MUTING n ENTER

Y1

Y2

X1 X2

Fig. 5-6

6.Receive the PAL-N monoscope signal on the main/sub picture.

7.Check the sub picture position as specified above.

8.If necessary set to service mode and adjust "PPH5", "PPV5".

9.Write the data into memory. MUTING n ENTER

5-7. TEXT POSITION ADJUSTMENT (CCD-CCHP)

1.Receive RF signal with text.

2.Check the text position.

X1 = X2

4.If necessary set to service mode and adjust "CCHP".

5.Write the data into memory. MUTING n ENTER

X1 X2

Fig. 5-7

– 42 –