Sony KP-57WV600 operating instructions Press SAT/CABLE Function

To connect the cable box and cable

1Connect the cable from your cable company to the TV’s VHF/UHF jack.

2Use a coaxial cable to connect the TV’s TO CONVERTER jack to the cable box’s input jack. (The TV’s internal converter lets you switch between unscrambled signals coming straight into the TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter.)

3Use a coaxial cable to connect the cable box’s output jack to the TV’s AUX jack.

4Run the Auto Setup program, as described in “Setting Up the Channel List” on page 43.

Cable box Coaxial cable AUX

IN

			3
		OUT			TO
			2	CONVERTER
						TV
		75-ohm coaxial cable
		(not supplied)
			1	VHF/UHF
	CATV cable (unscrambled channels)
Notes on Using This Connection
To Do This ...	Do This ...
Use the cable box	Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
	and then use the cable box to switch channels.
Set up the TV remote control	Program the remote control. See “Programming the Remote Control” on
to operate the cable box	pages 51-52.
Activate the remote control to	Press SAT/CABLE FUNCTION.
operate the cable box
Prevent the accidental	When using the cable box, you need the TV to stay on the channel the cable
switching of TV channels	box is set to (usually channel 3 or 4). You can use the TV’s Channel Fix
	feature to lock in a specific channel. For details, see “Using the Channel
	Menu” on page 78.
Switch the TV’s input	Press ANT to switch back and forth between the TV’s VHF/UHF
between the cable box and	(unscrambled channels) and AUX (scrambled) inputs.
cable

Setup

SETUP

SETUP

SETUP

SETUP

23